Photo of author
Written By EricAdamson

Lorem ipsum dolor sit amet consectetur pulvinar ligula augue quis venenatis. 

The Creeper is the Only tool you must have

You’re on the road to work in a bright day and suddenly you hear something under your car that makes you feel nervous. There’s nothing wrong, but the car is functioning smoothly. What should you do? You decide not to call your mechanic, but instead , wait until you are at home and check it on your own.

After the car is in the garage It’s time to check the car for the source of the rattle. The idea of getting under the car isn’t very appealing, but it could help you save money by figuring out what is causing the rattle , and you can actually repair it. It is best to lay boxes of cardboard or drop cloths or blankets beneath the rear of your car. You take a flash light, then to your back and slide under the car. You immediately rub the bottom of the car with the rim of your baseball cap. This causes dirt and trash to fall into your face and on to your chest. Isn’t it exciting enough.

A creeper under the car is an essential device for anyone who likes doing their own repairs.

Repairing your auto on your own car can really save you a lot of cash. There is no need to take your vehicle to the mechanic for an issue that is simple. Instead, you could purchase the same tools used by professionals and repair the issue yourself.

A creeper is the perfect tool to get in and out of the underside of your truck or car. An automotive creeper is one of the handiest garage tools you’ll ever buy. A quality creeper offers convenience, durability and can come with an upholstered headrest as well as a V drop for shoulder support. A further feature is the creeper should be built with a sturdy frame for maximum strength, and constructed of lightweight steel tubing.

The creeper needs to be padded and covered in heavy-duty low maintenance vinyl and provides an easy access to all of your tools for the automotive. Premium creepers offer tool trays that snap on to the side rails of the creeper and save time and energy by storing all the tools you need at your fingertips.

The majority of creepers are limited in their wheel movements and can’t be used to roll over floor pads. A quality under car creeper isn’t only a piece covered plywood that has wheels. A creeper with six polyolefin wheels that are specially designed will provide smooth, smooth rolling due to a shock-absorbing spring. The casters with a heavy-duty design are available in your choice of colours.

Hammers for Automotive Work

Welcome back to our series on tools for automotive use for the newcomer to automotive work and tools. In this article I’m briefly going to go over the fundamental theory of what kind of hammer is needed for automotive work. The issue of auto body work and hammer use is more complex and takes years of education. Hammers are employed in automotive mechanical work to “Persuade” a tight object to loosen. Do not use a hammer to force something into submission.

You may be familiar with the more popular carpenter hammer. Although they are suitable to do certain kinds of work in the automotive industry but they’re not the ideal hammer. This is a claw hammer that can be used for removing nails. A ball peen hammer is what you actually need. If you own a claw hammer and aren’t looking to purchase a replacement, the claw hammer is probably suitable for the majority of jobs. It is essential to ensure that the head of your claw hammer does not get loose, as this could cause a myriad of problems that can arise with claw hammers. The shank of the hammer should be securely inserted into the head of the hammer, or there is a chance of it breaking and damaging yourself or your car. A flying claw hammer is not a good safety choice, so take care when using a claw hammer to work on your car.

The same is true for all things that require force, especially automotive work, you should use forceful strikes with care. Cast aluminum is a popular material used to create automobile components. If you knock it hard, it can crack or break. You should be aware of what parts that you strike and the force at which it is, as you may be paying more for repairs than you planned.


In order to keep your vehicle in peak condition, it is important to ensure that every part is maintained. For the separate vehicle systems such as the engine, transmission etc., we have many repair tools. These tools are used to fix and maintain your vehicle. Everyone, from mechanics to the owner of a vehicle, should be able find the tools at his disposal in time of need. There is a list of ten common tools used in the repair and maintenance of vehicles.


They can be utilized to lift a vehicle off the ground. Jack stands and jacks are essential for car repairs. They can be used to replace rear and front brakes or change tires that are flat. To make sure that jack stands can handle the weight of the vehicle, it is important to determine its curb weight. The curb rating of a jack stand has to be at least half of the curb weight of a vehicle. A jack stand should be able to horizontally reach jacking point of a car. Also, you should verify the length and the dimensions of the jack stand arms. The arm of the jack stand should be able to reach the frame member vertically.


The most commonly used tool for replacing tires is the lug wrench often referred to as tire irons. These L and shape lug wrenches are used to remove the hubcap.


If you don’t have the proper lighting for your work and work lights, it can be difficult to see under the engine. It is suggested that you always have a fully charged flashlight. If you’re working on the internal components of an engine, a flashlight is a essential item. Keep one in your emergency kit.


To get rid of a clamp or clip, you’ll require a complete set screwdriver. There are many types of heads for these tools. A specific screwdriver is required to remove a certain type of fastener. Hence, It is necessary to have every type of screwdriver in order to ensure that the job is done without hassle. A magnetized head screwdriver can be useful for getting a screw out of an unaccessible area in the event that you lose it.


Pliers can be used for many purposes. They can be useful to cut and remove stuck nuts as well as for bending and cutting large wires and compressing materials. It is recommended to possess an plier set consisting of a couple of wire cutters as well as needle-nose pliers that reach the parts of cars that your fingers can not reach.

Hammer Set:

In the process of working on or maintaining the vehicle, hammers don’t get used frequently. These can still be used for working on the body of the vehicle. By using the right auto body hammer, alignment issues, and sight bumps can be fixed. A hammer set must consist of a rubber mallet to smooth out any the dents.


To remove the spark plug with out breaking or damaging it, all you require is the spark plug spanner, or a socket wrench with an extension and plug socket. They come with the grommet made of rubber that gives a better grip while replacing or extracting a spark plug.


They are great tools to remove bolts and nuts. They can be used as a substitute for a variety of wrench sizes. However, it is a bit difficult to use them in tight areas of vehicles because of their heavy heads.


A compressor with an air supply is a great tool for inflating automobile tires. It’s extremely lightweight and simple to use. A 12-volt compressor is able to fill a car tire within a few minutes. Inflators for tires can be very efficient in keeping the recommended pressure.


To monitor the amperage and voltage of the car’s battery, multimeters for cars are the ideal option. They will help to ensure that a car battery is kept at optimum charged and eliminate the possibility of a battery dying. Car multimeters can be used to measure the circuit resistance of car components. For a vehicle to run smoothly it is necessary to take a few minutes to do its maintenance. Here at Moglix we are aware of the necessity of car repair and maintenance. Moglix offers the most effective tools for a fair cost. Buy car repairing tools at and experience a delightful shopping experience.

Additional Resource: